Overview
A camera and expansion connector are attached to the GR-LYCHEE board. This project introduces how to install the GR-LYCHEE camera and how to attach an optional LCD.
![sp-device-shipment](/sites/default/files/inline-images/sp-device-shipment.jpg)
Camera
Attach the flexible cable to the camera body. Be sure to pay attention to the orientation of the cable.
![sp-camera-connect](/sites/default/files/inline-images/sp-camera-connect.jpg)
Next, attach the flexible cable to GR-LYCHEE. Pay attention to the direction of the cable here as well.
![sp-camera-connection](/sites/default/files/inline-images/sp-camera-connection.jpg)
The image to the right shows how it should look once connected.
![sp-camera-connected](/sites/default/files/inline-images/sp-camera-connected.jpg)
Arduino Shield Connector, USB Connector
When connecting a shield for Arduino or when installing a USB connector, solder each.
![sp-shield-connecter](/sites/default/files/inline-images/sp-shield-connecter.jpg)
Here is an image with the Adafruit LCD shield connected.
![sp-adafruit-connecter](/sites/default/files/inline-images/sp-adafruit-connecter.jpg)
LCD
The GR-LYCHEE can be fitted with a 40-pin flexible cable LCD. The photo shown here is an ATM0430D25 of a 4.3-inch TFT.
![gr-lychee-atm0430d25-4.3tft](/sites/default/files/inline-images/gr-lychee-atm0430d25-4.3tft.jpg)
Open the connector's cover and install the flexible cable. Be sure to pay attention to the orientation of the cable.
![sp-lcd-connect-cable](/sites/default/files/inline-images/sp-lcd-connect-cable.jpg)
The image to the right shows how the the set-up should look after installation.
![sp-lcd-connected-board](/sites/default/files/inline-images/sp-lcd-connected-board.jpg)