Renesas Electronics Corporation
Search

ADC1215S080HN

Obsolete

Single 12-bit ADC 80 Msps with Input Buffer CMOS or LVDS DDR digital outputs

ADC1215S SER Datasheet

Overview

The ADC1215S is a single-channel 12-bit Analog-to-Digital Converter (ADC) optimized for high dynamic performances and low power consumption at sample rates up to 80 Msps. Pipelined architecture and output error correction ensure the ADC1215S is accurate enough to guarantee zero missing codes over the entire operating range. Supplied from a single 3 V source, it can handle output logic levels from 1.8 V to 3.3 V in CMOS mode. It supports the LVDS DDR output standard. An integrated SPI allows the user to easily configure the ADC. With excellent dynamic performance from the baseband to input frequencies of 170 MHz or more. The integrated input buffer ensures that the input impedance remains constant and low and the performance consistent over a wide frequency range.
ADC1215S080HN - Block Diagram
ADC1215S080HN - Block Diagram
  • 12-bit pipelined ADC core
  • Clock input divider by 2 for less jitter contribution
  • CMOS or LVDS DDR digital outputs
  • Duty cycle stabilizer
  • Fast OuT of Range (OTR) detection
  • Flexible input voltage range: 1 V p-p to 2 V p-p
  • HVQFN40 package
  • Input bandwidth, 600 MHz
  • Integrated input buffer
  • Offset binary, 2's complement, gray code
  • Pin compatible with the ADC1415S series, ADC1115S series and the ADC1015S
  • series
  • Power-down and Sleep modes
  • Sample rate up to 80 Msps
  • Serial Peripheral Interface (SPI)
  • SNR, 70.5 dBFS
  • SFDR, 90 dBc

Documentation

Featured Documentation
Type Title Date
Datasheet
ADC1215S SER Datasheet
PDF 377 KB
End Of Life Notice
PDN# : DC-14-01 PRODUCT DISCONTINUANCE NOTICE
PDF 538 KB
2 items

Design & Development

Evaluation Board - No Image Available

ADC1215S080F1

Demonstration
Learn More

ADC1215S080F1 demo board; CMOS version; SPI, Regulators and CMOS buffer on board

IDT's ADC demonstration board is suitable for dynamic performance evaluations from low to high IF configuration. A Data acquisition board can be used to easily analyze...

Featured Documents:
Demo Board Software ADC_1_r04
Evaluation Board - No Image Available

ADC1215S080F2

Demonstration
Learn More

ADC1215S080F2 demo board; SPI, Regulators on board; LVDS output only SAMTEC connector

IDT's ADC demonstration board is suitable for dynamic performance evaluations from low to high IF configuration. A Data acquisition board can be used to easily analyze...

Featured Documents:
Demo Board Software ADC_1_r04

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.

Explore ECAD Models
Diagram of ECAD Models