GreenPAK SLG46533V Development Kit with Socket Adapter
The SLG46533V-SKT includes the SLG4SA20-20x30 socket adapter and 50 SLG46533V samples.
Overview
Description
The SLG46533V/M provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macro cells of the SLG46533V/M. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
Features
- Logic & Mixed Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8 V (±5%) to 5 V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Four Analog Comparators (ACMP);
- Two Voltage References (Vref);
- Twenty-six Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- Twelve Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or 3-bit LUT;
- One Selectable Programmable Pattern Generator or 2-bit LUT;
- Five 8-bit delays/counters or 3-bit LUTs;
- Two 16-bit delays/counters or 4-bit LUTs;
- Two Deglitch Filters with Edge Detectors;
- Combinatorial Logic:
- One 4-bit LUT;
- Serial Communications:
- I2C Protocol compliant;
- 16x8 RAM Memory with defined NVM OTP initial state;
- Pipe Delay - 16 stage/3 output (Part of Combination Function Macrocell);
- Programmable Delay;
- Two Oscillators (OSC):
- Configurable 25 kHz/2 MHz;
- 25 MHz RC Oscillator;
- Crystal Oscillator;
- Power-On-Reset (POR);
- Analog Temperature Sensor.
Comparison
Applications
Applications
- Personal Computers and Servers
- PC Peripherals
- Consumer Electronics
- Data Communications Equipment
- Handheld and Portable Electronics
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
GreenPAK SLG46533V 20-pin DIP Prototyping Board
The SLG46533V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
Featured Documents:
GreenPAK SLG46533M Development Kit with Socket Adapter
The SLG46533M-SKT includes the SLG4SA22-20x22 socket adapter and 50 SLG46533M samples.
GreenPAK SLG46533M 20-pin DIP Prototyping Board
The SLG46533M-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
Featured Documents:
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK DIP Adapter for the GreenPAK Advanced Development Board allows using the SLG46xxxV-DIP and SLG47xxxV-DIP Proto boards with the GreenPAK Advanced...
GreenPAK Advanced Development Board
The GreenPAK Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT /...
Featured Documents:
Available on Lab on the Cloud
Use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
GreenPAK DIP Development Board
The GreenPAK DIP Development Board is perfect for breadboarding and fast prototyping. It works in tandem with the GreenPAK Designer software (built into Go Configure™...
Featured Documents:
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
Featured Documents:
GreenPAK System Reset IC Demonstration Board
The SLG4RSTIC-DMO is a system reset demonstration board.
GreenPAK™ is an ideal solution for a fully customizable system reset IC. Since electronics containing...
GreenPAK Keypad Scanner Demonstration Board
The SLG4KPDSC-DMO is a keypad scanner demonstration board.
Using an MCU or SoC to scan a keypad is a less than ideal solution for human input. It often makes sense...
Featured Documents:
GreenPAK GPIO Expander Demonstration Board
The SLG4IOEXP-DMO is a GPIO expander demonstration board. Many programmable mixed-signal products include an I2C block which makes these components perfect for a GPIO...
Featured Documents:
GreenPAK Lite Development Board
The GreenPAK Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in a pair with the Go Configure™ Software...
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
This device is factory-configurable. Try the Custom Part Configuration Utility.
Processing table
| TQFN | Tape & Reel | 1 | Get Samples, | |
| MSTQFN | Tape & Reel | 1 | Get Samples, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
Videos & Training
GreenPAK I2C
Video List