Skip to main content
Order Now

Overview

Description

The Renesas RA8E2 MCU group features entry-line graphics-enabled 32-bit microcontrollers (MCUs) based on the Arm® Cortex®-M85 (CM85) core with Helium and TrustZone®, delivering breakthrough performance of over 3000 CoreMark points at 480 MHz, and graphics capabilities that drive TFT-LCD displays. These MCUs address diverse high-performance graphics applications in industrial automation, home appliances, smart home, consumer, building/home automation, and medical/healthcare market segments.

The RA8E2 MCUs integrate the high-performance CM85 core with large memory, and an optimized peripheral set including a graphics TFT-LCD controller with parallel RGB interface, 2D drawing engine, and multiple external memory interfaces, which addresses the needs of price-sensitive graphics applications. These MCUs are available in 224-pin packages.

The RA8E2 MCUs are fully supported by the RA Flexible Software Package and a comprehensive set of hardware and software development tools.

Features

  • 480MHz Arm® Cortex®-M85 with Helium™ MVE
  • 1MB Flash memory and 672KB of SRAM including TCM
  • 32KB I/D caches and 12KB data flash
  • Graphics LCD controller with RGB I/F
  • 2D drawing engine
  • 16/8-bit external memory interfaces (CS/SDRAM)
  • ARMv8-M TrustZone security
  • On-chip immutable ROM for first stage bootloader
  • xSPI compliant Octal SPI with XIP
  • USB 2.0 FS
  • 2ch of CAN FD
  • 32-bit and16-bit timers, 32-bit ultra-low-power timers
  • 12-bit ADC and 12-bit DAC
  • High-speed analog comparators
  • SCI (UART, Simple SPI, Simple I2C), SSI
  • SPI/ I2C multi-master interface
  • 224-pin BGA package

Comparison

Applications

  • Industrial Applications (Industrial HMI, Machine Vision)
  • Consumer (Video Doorbells, Exercise Equipment, Security Cameras, Appliances)
  • Smart Home and Building Automation (Thermostats, Security Panels, Home Hubs)
  • Office Automation (Printer Display, Barcode Scanner, QR Code Reader, Fingerprint Scanner)
  • Healthcare (Patient Monitors, BP Monitors, Imaging Equipment)
  • Voice AI Applications

Documentation

Design & Development

Software & Tools

Software & Tools

Software title
Software type
Company
RA Flexible Software Package (FSP)
FSP is an enhanced software package designed to provide easy-to-use, scalable, high-quality software for embedded system designs using Renesas RA Family of Arm Microcontrollers. Note: FSP with e² studio Installer (Platform Installer) will install the e² studio tool, FSP packs, GCC toolchain, and Segger J-Link drivers required to use this software. No additional installations are required.
Software Package Renesas
E2 emulator [RTE0T00020KCE00000R]
On-chip debugging emulator. Also available as a flash memory programmer. [Support MCU/MPU: RA, RE, RH850, R-Car D1, RL78, RX, RISC-V MCU]
Emulator Renesas
E2 emulator Lite [RTE0T0002LKCE00000R]
On-chip debugging emulator. Also available as a flash memory programmer. [Support MCU/MPU: RA, RE, RL78, RX, RISC-V MCU]
Emulator Renesas
PG-FP6
Flash memory programmer [Programming software: Dedicated GUI-based software, the "FP6 Terminal"] [Support MCU/MPU and devices: RA, RE, RX, RL78, RH850, RISC-V MCU, Renesas Synergy, Power Management, Renesas USB Power Delivery Family, ICs for Motor Driver/Actuator Driver, SuperH RISC engine, V850, 78K, R8C]
Programmer (Unit/SW) Renesas
Renesas Flash Programmer (Programming GUI)
Flash memory programming software [Support MCU/MPU and devices: RA, RE, RX, RL78, RH850, RISC-V MCU Renesas Synergy, DA1453x, DA1459x, DA1469x, DA1470x, Power Management, Renesas USB Power Delivery Family, ICs for Motor Driver/Actuator Driver, V850, 78K0R, 78K0]
Programmer (Unit/SW) Renesas
Arm® Keil® MDK
Arm® Keil® MDK is a comprehensive software development solution for Arm-based microcontrollers, including RA Family MCUs, containing all the components that you need to create, build, and debug embedded applications.
IDE and Coding Tool Arm® Keil® MDK Arm®
IAR Embedded Workbench for Arm
IAR Embedded Workbench for Arm (EWARM) provides a complete development environment for Arm - including RA Family MCUs - generating fast, compact code and enabling you to take full control of your code.
IDE and Coding Tool IAR Systems
SEGGER emWin GUI Library for Renesas RA Products
SEGGER's emWin graphics library is a ready-to-use solution that provides a versatile and professional GUI platform for creating interactive and high-quality graphical user interfaces on any type of display for the Renesas RA family.
Imaging SEGGER
8 items

Sample Code

Models

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.

Diagram of ECAD Models

Videos & Training

RA8E2 480 MHz Arm Cortex-M85 Based Entry Line Graphics Microcontroller with Helium and TrustZone

Overview of the RA8E2 32-bit MCU group delivering breakthrough performance of over 3000 Coremark points at 480 MHz and graphics capabilities that drive TFT-LCD displays. Learn more on the RA8E2 page.