GreenPAK SLG46826 (STQFN-20) Development Kit with Socket Adapter
The SLG46826V-SKT includes the SLG4SA20SP-20x30 socket adapter and 50 SLG46826V (STQFN-20) samples.
Overview
Description
The SLG46826 provides a small, low power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple time Non-Volatile Memory (NVM) to configure the interconnect logic, the IOs and the macrocells of the SLG46826. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
Features
- In-System Programmability
- Multiple Time Programmable Memory
- Wide Range Power Supply
- 2.5 V (±8%) to 5 V (±10%) VDD
- 1.8 V (±5%) to 5 V (±10%) VDD2 (VDD2 ≤ VDD)
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Two High Speed General Purpose Rail-to-Rail Analog Comparators (ACMPxH);
- Two Low Power General Purpose Rail-to-Rail Analog Comparators (ACMPxL);
- Two Voltage References (Vref)
- Two Vref Outputs;
- Eleven Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- One Selectable Programmable Pattern Generator or 2-bit LUT;
- Six Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
- Eight Multi-Function Macrocells:
- Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
- One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;
- Serial Communications:
- I2C Protocol Interface;
- 2-Kbit (256 x 8) I2C-Compatible (2-Wire) Serial EEPROM emulation with Software Write Protection;
- Programmable Delay with Edge Detector Output;
- Deglitch Filter with Edge Detector;
- Three Oscillators (OSC):
- 2.048 kHz Oscillator;
- 2.048 MHz Oscillator;
- 25 MHz Oscillator;
- Analog Temperature Sensor;
- Power On Reset (POR).
Comparison
Applications
- Personal Computers and Servers
- PC Peripherals
- Consumer Electronics
- Data Communications Equipment
- Handheld and Portable Electronics
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
GreenPAK SLG46826 20-pin DIP Prototyping Board
The SLG46826V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
Featured Documents:
GreenPAK SLG46826 (TSSOP-20) Development Kit with Socket Adapter
The SLG46826G-SKT includes the SLG4SA20-65x64 socket adapter and 50 SLG46826G (TSSOP-20) samples.
Training Adapter Board for SLG46826
The SLG4TA20SP-SLG46826 is a training adapter board for the SLG46826 programmable mixed-signal matrix with in-system programmability.
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK DIP Adapter for the GreenPAK Advanced Development Board allows using the SLG46xxxV-DIP and SLG47xxxV-DIP Proto boards with the GreenPAK Advanced...
GreenPAK Advanced Development Board
The GreenPAK Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT /...
Featured Documents:
Available on Lab on the Cloud
Use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
GreenPAK DIP Development Board
The GreenPAK DIP Development Board is perfect for breadboarding and fast prototyping. It works in tandem with the GreenPAK Designer software (built into Go Configure™...
Featured Documents:
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
Featured Documents:
GreenPAK Introduction Kit
The SLG4DVKINTRO GreenPAK Introduction Kit is perfect for customers starting new development.
GreenPAK Introduction Kit includes:
- SLG4DVKADV GreenPAK Advanced Development...
Featured Documents:
GreenPAK Lite Development Board
The GreenPAK Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in a pair with the Go Configure™ Software...
IO-Link Device Transceiver with Cost-Optimized Feature Set Evaluation Board
The CCE4503-EVAL-V3 evaluation board is designed to evaluate and demonstrate the CCE4503 IO-Link Device Transceiver.
The CCE4503 is an easy-to-use device side...
Featured Documents:
IO-Link Device PHY with Integrated Frame Handler Evaluation Board
The CCE4502-EVAL-V4 evaluation board is designed to evaluate the CCE4502 IO-Link device PHY with integrated frame handler.
The CCE4502 is a highly integrated...
Featured Documents:
GreenPAK Programmable Mixed-signal Matrix Evaluation Board
The QCIOT-SLG46826POCZ evaluation board enables quick prototyping of the GreenPAK™ SLG46826V programmable mixed-signal matrix.
The SLG46826V provides a small, low-power...
Featured Documents:
GreenPAK Introduction Kit Lite
The SLG4DVKLITEINTRO GreenPAK™ Introduction Kit is perfect for customers starting new development with the GreenPAK programmable mixed-signal products.
GreenPAK...
Featured Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
This device is factory-configurable. Try the Custom Part Configuration Utility.
Processing table
| TSSOP | Tape & Reel | 1 | Get Samples, | |
| TQFN | Tape & Reel | 1 | Get Samples, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
Videos & Training
GreenPAK I2C
Video List
