Rad Hard 40V Quad Op Amp Evaluation Board
The ISL70444SEHEVAL1Z evaluation platform is designed to evaluate the ISL70444SEH 19MHz radiation hardened 40V quad rail-to-rail input-output (RRIO), low power...
主要ドキュメント:
概要
説明
The ISL73444SEH features four low-power amplifiers optimized to provide maximum dynamic range. This operational amplifier (op amp) features a unique combination of rail-to-rail operation on the input and output as well as a slew-enhanced front-end that provides ultra-fast slew rates positively proportional to a given step size, thereby increasing accuracy under transient conditions, whether it's periodic or momentary. The ISL73444SEH also offers low power, low offset voltage, and low-temperature drift, making it ideal for applications requiring both high DC accuracy and AC performance. With <5µs recovery for Single Event Transients (SET) (LETTH = 86.4MeV•cm2/mg), the number of filtering components needed is drastically reduced. The ISL73444SEH is also immune to single event latch-up because it is fabricated using the Renesas proprietary PR40 Silicon On Insulator (SOI) process. The amplifier is designed to operate over a single supply range of 2.7V to 40V or a split supply voltage range of ±1.35V to ±20V. Applications for this amplifier include precision instrumentation, data acquisition, precision power supply controls, and process controls. The ISL73444SEH is available in a 14 Ld hermetic ceramic flatpack and die forms that operate across the temperature range of -55 °C to +125 °C.
特長
- Electrically screened to DLA SMD# 5962-13214
- Acceptance tested to 50krad(Si) (LDR) wafer-by-wafer
- <5µs recovery from SEE (LETTH = 86.4MeV•cm2/mg)
- Unity gain stable
- Rail-to-rail input and output
- Wide gain bandwidth product: 19MHz
- Wide single and dual supply range: 2.7V to 40V max
- Low input offset voltage: 400µV
- Low current consumption (per amplifier): 1.1mA, typ.
- No phase reversal with input overdrive
- Slew rate - Large signal: 60V/µs
- Operating temperature range: -55 °C to +125 °C
- Radiation acceptance (see TID report) - Low dose rate (0.01rad(Si)/s): 50krad(Si)
- SEE hardness (see SEE report for details)
- SEB LETTH (VS = ±21V): 86.4MeV•cm2/mg
- SEL immune (SOI Process)
製品比較
アプリケーション
- Precision instruments
- Active filter blocks
- Data acquisition
- Power supply control
- Process control
設計・開発
Processing table
| CFP | Tray | 1 | Not Applicable | サンプルを入手, | ||
| CFP | Tray | 25 | 5962L1321403VXC | Not Applicable | ||
| 100 | 5962L1321403V9A | |||||
| DIE | 5 |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product