耐放射線特性、デュアル出力ポイント・オブ・ロード、統合同期バック、低ドロップアウト・レギュレータ デモボード
ISL70005SEHDEMO1Z デモボードは、耐放射線特性をもつISL70005SEH、3A降圧レギュレータおよび1Aソース/シンクLDOの性能を実証するために設計されています。デモボードは、DDRメモリのVDDQおよびVTT電源レールアプリケーション向けに特別設計されています。降圧レギュレータの出力電圧は、2.5V、1.8V...
概要
説明
The ISL70005SEH is radiation hardened dual output Point-of-Load (POL) regulator combining the high efficiency of a synchronous buck regulator with the low noise of a Low Dropout (LDO) regulator. They are suited for systems with 3.3V or 5V power buses and can support continuous output load currents of 3A for the buck regulator and ±1A for the LDO. The buck regulator uses a voltage mode control architecture and switches at a resistor adjustable frequency of 100kHz to 1MHz. Externally adjustable loop compensation allows for an optimum balance between stability and output dynamic performance. The internal synchronous power switches are optimized for high efficiency and excellent thermal performance. The LDO is completely configurable independent of the switching regulator. It uses NMOS pass devices and separate chip bias voltage (L_VCC) to drive its gate, enabling the LDO to operate with a very low voltage at the L_VIN input. The LDO can sink and source up to 1A continuously, making it an ideal choice to power DDR memory. The ISL70005SEH is available in a space-saving 28 Ld ceramic dual flat-pack package or in die form. It is specified to operate across a temperature range of TA = -55 °C to +125 °C.
特長
- Electrically screened to DLA SMD 5962-19209
- Dual output regulator: 3A Synchronous buck and ±1A LDO
- DDR, DDR2, DDR3, and DDR4 VDDQ/VTT regulator
- Independent EN, SS, and PG indicators
- ±1% reference voltage
- 1A current sourcing/sinking capability on LDO
- External clock synchronization: 100kHz to 1MHz
- Full military temperature range operation
- TA = -55 °C to +125 °C
- TJ = -55 °C to +150 °C
- TID Rad Hard Assurance (RHA) testing
- HDR (50-300rad(Si)/s): 100krad(Si)
- LDR (0.01rad(Si)/s): 75krad(Si)
- SEE hardness (see test report)
- No DSEE with VDD = 6.0V at LET 86.4MeV•cm2/mg
- No SEFI at LET 43MeV•cm2/mg
製品比較
アプリケーション
アプリケーション
- Point-of-load for low power FPGA core
- Auxiliary and I/O supply voltages
- DDR memory power for VDDQ and VTT rails
- Distributed power system of satellite payloads
設計・開発
ソフトウェア／ツール
ソフトウェア／ツール
| Software title
|
Software type
|
会社名
|
|---|---|---|
| iSim:PEオフラインシミュレーションツール iSim Personal Edition（iSim：PE）は、プロジェクトの早い段階で設計サイクルを速め、プロジェクト初期のリスクを低減し、現在のみならず次世代の設計に耐えうる部品を選定します。
|
Simulator | ルネサス |
1件
|
||
ボード＆キット
耐放射線特性、デュアル出力ポイント・オブ・ロード、統合同期バック、低ドロップアウト・レギュレータ評価ボード
ISL70005SEHEV2Z 評価ボードは、耐放射線特性をもつISL70005SEH、3A降圧レギュレータおよび1Aソース/シンクLDOの性能を評価するために設計されています。3V~5.5V入力に最適化されており、3A、1.8V~3.3Vの降圧出力と1Aソース/シンク、1.2V LDO出力を生成します。ボード上の入出力接続...
主要ドキュメント:
Renesas Radiation Hardened Power Solution for RTG4 FPGA
Over the last decade satellites and spacecrafts have seen an exponential increase in the need for on-board data processing and storage demands. Additionally, major...
主要ドキュメント:
Renesas Rad Hard Power Management Reference Design for AMD's Space Grade XQRKU060
Over the last decade satellites and spacecrafts have seen an exponential increase in the need for on-board data processing and storage demands. Additionally, major...
主要ドキュメント:
Power Management Reference Design for AMD Versal XQRVC1902
The ISLVERSALDEMO2Z demo board provides the power management for the AMD Xilinx Space Grade Versal ACAP AI Core VC1902 using Renesas' Radiation Hardened Power...
Evaluation Board for ISL73007SEH (12VIN to 3.3V-1.2V output)
The ISL73007SEHEV2Z evaluation board features the ISL73007SEH buck regulator. The IC is a small footprint radiation hardened POL designed for critical low power...
主要ドキュメント:
Evaluation Board for ISL73007SEH (12VIN to 5V output)
The ISL73007SEHEV3Z evaluation board features the ISL73007SEH buck regulator. This IC is a small footprint radiation hardened POL designed for critical low power...
主要ドキュメント:
Evaluation Board for ISL73007SEH (12VIN to 3.3V output)
The ISL73007SEHEVAL1Z evaluation board features the ISL73007SEH buck regulator. This IC is a small footprint radiation hardened POL designed for critical low power...
モデル
ECADモデル
[製品選択]テーブル内の製品名をクリックするとSamacSysが提供する回路図シンボル、PCBフットプリント、3D CADモデルがご確認いただけます。 お探しのシンボルやモデルが見つからない場合、Webサイトから直接リクエストできます。
Processing table
| CFP | Tray | 1 | Not Applicable | サンプルを入手, | ||
| CFP | Tray | 25 | 5962R1920901VXC | Not Applicable | ||
| 10 | 5962R1920901V9A | |||||
| DIE | 5 |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product