Name: 5P49V5935 - VersaClock 5 Low Power Programmable Clock Generator with Integrated Crystal
Brand: Renesas Electronics Corporation
SKU: 5P49V5935 - VersaClock 5 Low Power Programmable Clock Generator with Integrated Crystal
Availability: OutOfStock

特長

4 differential outputs LVPECL, LVDS, HCSL - or 4 LVCMOS outputs
<0.7ps RMS typical phase jitter on outputs
Four fractional output dividers (FODs)
Independent spread spectrum capability on each output pair
Stores 4 different configurations in OTP non-volatile memory
Up to 350MHz input/output frequencies
Redundant clock inputs with manual switchover
Programmable loop bandwidth, output to output skew, slew rate control
Individual output enable/disable
Meets PCIe^® Gen 1/2/3, USB 3.0, 1/10 GbE clock requirements
1.8/2.5/3.3V core and output voltages
4mm x 4mm 24-pin VFQFPN package
-40 °C to +85 °C operating temperature range
Supported by Renesas' Timing Commander™ software tool

プログラマブルクロック内の他の製品を探す

説明

The 5P49V5935 is a programmable clock generator intended for high-performance consumer, networking, industrial, computing, and data communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using an I²C interface. This is Renesas' fifth generation of programmable clock technology (VersaClock^® 5). The 5P49V5935, by default, uses an integrated 25MHz crystal as an input reference. It also has a redundant external clock input. A glitchless manual switchover function allows the selection of either input reference during normal operation.

Two select pins allow up to four different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe), or system production margin testing. The device may be configured to use one of two I²C addresses to allow multiple devices to be used in a system.

アプリケーション

Ethernet switch/router
PCI Express 1.0/2.0/3.0
Broadcast video/audio timing
Multi-function printer
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fiber Channel, SAN
Telecom line cards
1GbE and 10GbE

適用されたフィルター

読込中

フィルター

読込中

フィルター

読込中

Patrice Cater and Baljit Chandhoke introduce IDT's (acquired by Renesas) VersaClock 5 with an integrated crystal, emphasizing its compact design, ease of integration, and cost efficiency. They showcase its performance and versatility on an evaluation board, highlighting the device's ability to eliminate external frequency tuning components and its low power consumption. Available in two models, further details are accessible on Renesas's Programmable Clocks page.

This video provides an overview of the VersaClock 5 programmable clock generator family, including the 5P49V5901, 5P49V5913, 5P49V5914, 5P49V5923, 5P49V5925, 5P49V5927, 5P49V5929.

The VersaClock 5 family is an in-system programmable clock generator featuring up to four universal output pairs capable of producing independent frequencies up to 350 MHz configurable as HCSL, LVPECL, LVDS, or dual LVCMOS outputs. The highly integrated device consolidates four differential or eight single-ended clock generators and can store up to four different configuration settings, helping to minimize board space and bill-of-materials. Upon request, devices may be factory-programmed to the customer’s desired configuration.

Presented by Baljit Chandhoke, product line manager at IDT. Visit the Programmable Clocks page for more information.

VersaClock® 5 is a low-power programmable clock generator with best-in-class jitter performance with less than 0.7psec RMS phase jitter from 12KHz to 20MHz. The highly integrated device consolidates four differential or eight single-ended clock generators and can store up to four different configuration settings, helping to minimize board space and bill-of-materials. The high-performance clock generator operates at less than 100mW core power (50 percent lower than competing devices), helping to ease system thermal constraints and reduce operating power expenses.

VersaClock 5 can take a crystal or a clock input. It has 4 fractional output dividers which allow the programming of 4 independent frequencies up to 350MHz. The four universal output pairs are independently configurable as HCSL, LVPECL, LVDS, or dual LVCMOS outputs. It also features a reference clock output. The fractional output dividers driving each output pair are easily programmed via I2C while the device is operating in the system, lending itself to system tuning and margin testing. Unlimited in-system reprogramming is possible via I2C, whereas four banks of one-time programmable non-volatile memory provide flexibility for multi-project inventory consolidation or design changes in field or production units. Upon request, devices may be factory-programmed to the customer's desired configuration.

Presented by Baljit Chandhoke, Product Marketing Manager at Integrated Device Technology, Inc.

This is a video introduction and demonstration of the VersaClock 5 Evaluation Board. This device uses Renesas's Timing Commander™ software platform, allowing engineers to configure and program their devices with an intuitive, time-saving graphical user interface (GUI).

The 5P49V5901 is an in-system programmable clock generator featuring four universal output pairs capable of producing independent frequencies up to 350 MHz in various output types. With RMS phase jitter less than 0.7 picoseconds over the full 12 kHz to 20 MHz integration range, the new device meets the stringent jitter requirements of PCI Express® Gen 1/2/3, USB 3.0, and 1G/10G Ethernet. The high-performance clock generator operates at less than 100 mW core power (50 percent lower than competing devices), helping to ease system thermal constraints, reduce operating power expenses, and maximize battery life.

The 5P49V5901's four universal output pairs are each independently configurable as HCSL, LVPECL, LVDS, or dual LVCMOS outputs. The fractional output dividers driving each output pair are easily programmed via I2C while the device is operating in the system, lending itself to system tuning and margin testing. Unlimited in-system reprogramming is possible via I2C, whereas four banks of one-time programmable non-volatile memory provide flexibility for multi-project inventory consolidation or design changes in field or production units. Upon request, devices may be factory-programmed to the customer's desired configuration.

Presented by Shudong Zheng, Sr. Design Engineer at IDT. For more information about Renesas's VersaClock 5, visit our VersaClock5 page.

Description

IDT's innovative support tool, Timing Commander™, expedites development cycles by empowering customers to program sophisticated timing devices with an intuitive and flexible Graphical User Interface. IDT's Timing Commander is a Windows™-based platform designed to serve user-friendly configuration interfaces, known as personalities, for various IDT products and product families. With a few simple clicks, the user is presented with a comprehensive, interactive block diagram offering the ability to modify desired input values, output values, and other configuration settings. The software automatically makes calculations, reports status monitors, and prepares register settings without the need to reference a datasheet. The tool also automatically loads the configuration settings over USB to an IDT evaluation board for immediate application in the circuit. Once the device has been configured and tuned for optimal system performance, the configuration file can be saved for factory-level programming before shipment. For more information about Timing Commander, visit our Timing Commander page .

IDT's innovative support tool, Timing Commander™, expedites development cycles by empowering customers to program sophisticated timing devices with an intuitive and flexible Graphical User Interface. IDT's Timing Commander is a Windows™-based platform designed to serve user-friendly configuration interfaces, known as personalities, for various IDT products and product families. With a few simple clicks, the user is presented with a comprehensive, interactive block diagram offering the ability to modify desired input values, output values, and other configuration settings. The software automatically makes calculations, reports status monitors, and prepares register settings without the need to reference a datasheet. The tool also automatically loads the configuration settings over USB to an IDT evaluation board for immediate application in the circuit. Once the device has been configured and tuned for optimal system performance, the configuration file can be saved for factory-level programming prior to shipment. Presented by Steven Gutierrez, Senior Product Application Engineer at IDT.

Resources

Timing Commander

ニュース＆ブログ

ニュース

2015年5月26日

IDT社、水晶振動子を一体化したプログラマブルな VersaClock 5クロックジェネレータを発表

読込中読込中

Product Selector マイクロコントローラとマイクロプロセッサ

アプリケーション

設計リソース

サポート

サンプル&ご購入

会社情報

言語

5P49V5935

VersaClock 5 Low Power Programmable Clock Generator with Integrated Crystal

特長

説明

アプリケーション

フィルター

フィルター

ソフトウェア／ツール

サンプルコード

シミュレーションモデル

Resources

Resources

ニュース＆ブログ