概要

The ISL71610SLHM is a passive-input digital signal isolator with a CMOS output. It has a similar interface but better performance and higher package density than other optocouplers. The ISL71610SLHM is manufactured with Giant Magnetoresistive (GMR) technology for small size, high speed, and low power. A ceramic/polymer composite barrier provides excellent isolation and an unlimited barrier life. A series external resistor sets the input coil current and a capacitor in parallel with the current-limiting resistor provides improved dynamic performance. This versatile component can be used to replace a variety of optocouplers, functioning over a wide range of data rates, edge speeds, and power supply levels. The device output is compatible with 3.3V and 5V supplies, allowing an interface to controllers without additional level shifting. With the coil energized with a minimum of ±8mA (bidirectional current) the ISL71610SLHM is suitable for single ended and differential drive applications. The ISL71610SLHM is offered in an 8 Ld 5mm x 4mm SOIC package and is fully specified across the military ambient temperature range of -55°C to +125°C.

ISL71610SLHM - Single-Ended Configuration
ISL71610SLHM - Differential Configuration
ISL71610SLHM - Block Diagram
ISL71610SLHM - Pin Assignment
ISL71610SLHM - Single-Ended Configuration
ISL71610SLHM - Differential Configuration
ISL71610SLHM - Block Diagram
ISL71610SLHM - Pin Assignment
  • Barrier Voltage Endurance
    • 2.5kVRMS, for 1 minute, 600VRMS continuous (VDE V 0884-10 certified: file 5022321-4880-0001)
    • 1.5kVDC continuous
    • 500VDC at 86MeV•cm2/mg SEDR
  • UL 1577 recognized: file reference E483309
  • Up to 100Mbps data rate
  • Flexible inputs with very wide input voltage range (resistor limited current through coil)
  • Bipolar current input failsafe output
  • No carrier or clock for low EMI emissions and susceptibility
  • 3V to 5.5V signaling operation
  • Passes NASA low outgassing specifications
  • NiPdAu-Ag leadframes (Pb-free, Sn-free)
  • Full military temperature range operation
    • TA = -55°C to +125°C
    • TJ = -55°C to +150°C
  • Radiation characterization
    • Low Lose Rate (LDR) (0.01rad(Si)/s): 75krad(Si)
  • SEE Characterization
    •  No SEB/SEL LET, VDD = 6.5V: 86MeV•cm2/mg

アプリケーション

  • Isolated power
  • CAN bus/device net
  • Differential line receiver
  • Optocoupler replacement
  • SPI interface
  • RS-485, RS-422, or RS-232

ドキュメント

設計・開発

ソフトウェアダウンロード
分類 タイトル 日時
PCB設計ファイル
ISL71610SLHMEV1Z Design Files
ZIP 420 KB
PCB設計ファイル
ISL71610-710EV1Z Design Files
ZIP 426 KB
2件
ISL71610-710EV1Z Evaluation Board

ISL71610-710EV1Z

Evaluation
詳しくはこちら

耐放射線/耐放射線特性デジタルアイソレータ評価ボード

ISL71610-710EV1Z評価ボードはISL71610MおよびISL71710M耐放射線デジタルアイソレータ部分、または ISL71710SLHM耐放射線特性巨大磁気抵抗（GMR）デジタルアイソレータ部分を特長とします。 これらICは、耐放射線デジタルアイソレータであり、CAN、SPI、RS-422...

主要ドキュメント:
ISL71610-710EV1Z User Guide
ISL71610SLHMEV1Z Evaluation Board

ISL71610SLHMEV1Z

Evaluation
詳しくはこちら

耐放射線特性パッシブ入力デジタルアイソレータ評価ボード

ISL71610SLHMEV1Z評価ボードはISL71610SLHM巨大磁気抵抗（GMR）デジタルアイソレータを評価するための迅速かつ容易な方法を提供します。 この ICはCAN、SPI、RS-422、およびRS-485アプリケーションなど...

主要ドキュメント:
ISL71610SLHMEV1Z User Manual

ECADモデル

[製品選択]テーブル内の製品名をクリックするとSamacSysが提供する回路図シンボル、PCBフットプリント、3D CADモデルがご確認いただけます。 お探しのシンボルやモデルが見つからない場合、Webサイトから直接リクエストできます。

ECADモデルを調べる
Diagram of ECAD Models

製品選択

    Processing table
    Pkg. Type
    Carrier Type
    MOQ
    ご購入 / サンプル
    型名
    ISL71610SLHMBZ
    circleアクティブ
    memory
    spa
    view_in_ar
    		SOICN Tray 25
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product